TACO 0013-VDTF3 Cast Pump Delta Circulator Iron
( Brand: Taco ), ( Manufacturer Part Number: 0013-VDTF3 ), ( Part Type: Pump ), ( Country Of Manufacture: United States )
Review TACO Cast Pump Delta t Variable Circulator Speed Iron
The 0013-vdtf3 Cast Pump Delta-T Circulator, manufactured by Taco Comfort Solutions, is a high-quality heating and cooling circulator designed for residential and light commercial applications. This cast pump is constructed using durable materials, ensuring long-lasting performance and reliability.
The pump features a delta-T control, which allows for precise temperature adjustment in hydronic systems. This feature makes it an excellent choice for applications that require precise temperature management, such as radiant floor heating or snow melt systems. The delta-T control also helps to improve energy efficiency by reducing energy waste and optimizing system performance.
The 0013-vdtf3 cast pump is designed to be easy to install and maintain. It comes with a standard 1/2-inch NPT threaded connection, making it compatible with a wide range of hydronic systems. The pump also has a built-in strainer basket, which helps to prevent debris from entering the pump and potentially causing damage.
The pump is equipped with a permanent magnet motor, which provides efficient and quiet operation. It also has a built-in thermal overload protection device, which helps to prevent the motor from overheating and burning out.
The 0013-vdtf3 cast pump is designed to withstand harsh environmental conditions, making it suitable for use in both indoor and outdoor applications. It is corrosion-resistant and has a durable powder-coated finish, which helps to protect it from rust and other forms of corrosion.
Overall, the 0013-vdtf3 Cast Pump Delta-T Circulator is a reliable and efficient circulator that is ideal for use in hydronic heating and cooling systems. Its delta-T control, durable construction, and easy installation make it a popular choice among homeowners and contractors alike.
Pros of buying a 0013-VDTF3 cast pump Delta-T circulator by Taco Iron:1. Reliable Performance: Taco is a well-known brand in the HVAC industry, and their products are known for their reliability and durability. The 0013-VDTF3 cast pump Delta-T circulator is no exception.
2. Energy Efficient: This circulator is designed to be energy efficient, which can save you money on your energy bills over time.
3. Versatile: The 0013-VDTF3 circulator is suitable for a wide range of applications, including radiant heating, snow melt, and other hydronic systems.
4. Easy Installation: The circulator is easy to install, which can save you time and money on installation costs.
Cons of buying a 0013-VDTF3 cast pump Delta-T circulator by Taco Iron:1. Price: The circulator is more expensive than some other options on the market, which may be a deterrent for some buyers.
2. Limited Warranty: The warranty on the circulator is only one year, which may be shorter than some other brands.
3. Limited Customization Options: The 0013-VDTF3 circulator has limited customization options, which may not be suitable for all applications.
Conclusion:The 0013-VDTF3 cast pump Delta-T circulator by Taco Iron is a reliable and energy-efficient option for those looking for a circulator for their HVAC system. While it is more expensive than some other options, its reliability and versatility make it a worthwhile investment for many. However, its limited warranty and customization options may be a downside for some buyers. Ultimately, whether or not this circulator is the right choice for you depends on your specific needs and budget.
Recommendation:If you are looking for a reliable and energy-efficient circulator for your HVAC system, the 0013-VDTF3 cast pump Delta-T circulator by Taco Iron is a solid choice. However, it is important to carefully consider your needs and budget before making a purchase. You may also want to consider comparing this circulator to other options on the market to ensure that it is the best fit for your needs.
Details:
Taco circulator are designed to operate with water and most glycol solutions. Simply dial in the design delta of the system or zone from f and then sit back and watch the circulator automatically adjust its performance to match the systems ideal btu hr output, while conserving energy and eliminating velocity noise. Your system needs a circulator that automatically adjusts to deliver the optimal heat transfer based on the actual operation of the system, every day, under all load conditions even when those conditions change.
Note image may not depict actual product this listing is for a brand new Taco 0013 vdtf 3 circulator, gasket seal, sensor and instruction sheet included. All in one pump control sensors included easy to install attach 2 sensors, dial in the desired delta Tull approved snap in PC board, replaceable led status panel fuse protected plug in low voltage wiring terminal optional integral flow check if increases system efficiency pump always runs at minimum required speed eliminates velocity noise eliminates need for a pressure by pass valve conserves energy achieves system design goals, even when installed system varies from original design pump automatically adjusts to current system conditions spend less time figuring out pressure drop for proper pump sizing when servicing existing systems. Taco variable speed delta circulator's all in one design combines a microprocessor based variable speed differential controller with the reliability and convenience of our cartridge circulator. What are the design conditions for those systems you inherited or have to service.
The addition of certain chemical additives may cause early failure and void warranty. Pump exercise, delivers ideal btu hr heat transfer for all styles of emitters caution Taco series circulator are designed for indoor use only.
Have a zone valve system or multi zone radiant manifolds running off a common circulator. No matter how good your original system design and heat loss calculations were, they included estimates and rules of thumb.
part #: 0013vdtf3 prices
- $440.00-$1022.76
specifications pumhva:
- brand: Taco
- mpn: 0013-vdtf3
- part type: Pump
- country of manufacture: United States
Payments pumhva:
- PayPal
General pumhva:
- Business & Industrial > MRO & Industrial Supply > HVAC > HVAC Parts > Pumps
- in stock: Yes
- condition: New other see details
Offer pumhva:
- # bids: 1
- Started: November 7, 2015, 2:45 am
- min. bid: $202.00
- # Sold: 0
- quantity: 1
- best offer: false
Returns pumhva:
- type: Money Back
- paid by: Buyer
- policy: returns accepted
- details: FULL REFUND EXCLUDING SHIPPING COST IF FOR ANY REASON YOU ARE UNHAPPY WITH THIS ITEM. PLEASE WITHIN 3 DAYS OF RECEIVING THE ITEM FOR FULL REFUND OR EXCHANGE. ITEM MUST BE RETURNED IN EXACT CONDITION WITH ALL TAGS AND IN ORIGINAL PACKAGING.
- time: 14 Days
Seller pumhva:
- zipcode: 02907
- city: Providence, Rhode Island
Shipping pumhva:
- type: Flat
- cost: $16.75
- handling: 1 days
Ratings:
- Best price in the entire world and fast shipping. I'll buy from them again AAA+ 11-03-15
- Great deal, great customer service 11-04-15
- Great transaction, great shipping timeframe 11-06-15
- thanks 11-03-15
- no problems 11-07-15
Taco 0013-VDTF3 Is Similar To:
- Integral 0010-f3-1 Circulator Iron Flow Taco Check Volt 115 Ifc Cartridge (27.7% similar) New still in the box...(July 30th, 2015)
- 0010-msf2-ifc Taco New 3 Speed (38.3% similar) The handy new four bolt flange matches up to any pump regardless of style, type or age. Simply install it and set the speed to match original pump performance. The speed replaces most commonly used circulator. Brand new Taco 0010-MSF2-IFC 3 speed cast iron circulator pump with integral flow check 1/...(May 12th, 2017)
- Taco 0011-f4 Circulator Pump (47.8% similar) Brand new in box never used...(June 8th, 2015)
- 0011-sf4-ifc Taco Stainless Steel Cartridge Circulator (44.1% similar) ...(February 14th, 2017)
- 0011-vdtf4 Taco Cast Iron Variable 687752873122 (59.5% similar) Cartridge circulator 00-VDT is a microprocessor-based pump which automatically adjusts its performance to deliver the optimal heat transfer based on actual operation of system. From the manufacturer cartridge circulator 00-VDT is a microprocessor-based pump which automatically adjusts its ...(April 8th, 2017)
- 0012-bf4-j Taco 115v Ci Circulator W-brzcart (46.3% similar) This is required by law. All brand names and logos are property of their respective owners used for identification purpose only. The best way to is through messaging system. Taco 115V ci circulator w bract. This is a detailed list of all known cross reference numbers. 52 Taco 115V ci circulator w ...(February 20th, 2017)
- 0013-f3 Taco New Cast Iron Circulator (65.3% similar) The Taco 0013 is specifically designed for high head flow applications in large residential and light commercial systems. The unique replaceable cartridge contains all of moving parts and allows for easy service instead replacing entire circulator. Taco circulator are designed to operate with water ...(February 13th, 2017)
- 0013-f3-1 Taco 1-6-hp Circulating Pump (54.9% similar) I 6HP 115 volts 3250RPM...(May 4th, 2017)
- Iron 0013-f3y Volts 1 Hp Cast Taco 230 Pump Circulator 6 Cartridge (46.2% similar) New never used hp Hz 60 volts rpm 3250 max pressure 125 psi max water temp 110...(June 9th, 2015)
- 0013-msf1-ifc Taco Circulator Pump 3 (54% similar) Flange to thread adapter kit is included at no-charge. Need to get rid of it. Taco circulating pump. When purchased it was over-sized for my system and did not return in time. Free shipping...(June 5th, 2017)
